fbpx

Car wash and service “Car Detail Lab”

Problem

Due to the company expansion, new boxes were built and there was an issue with the heating.

Solution

Installation of gas heating for these boxes is not cost-effective, because it needs additional costs for the project and installation. Therefore, we decided to install electric heating for both car wash and car service. Ceiling height is 4 meters, respectively, ceiling heating will be more efficient.

Result

It was installed 6 heaters BILUX P2400. On the total area of ​​the premise of 180 sq.m. the temperature did not fall below +18°C. The project payback period is 2 seasons or 10 months of work.

We recommend ordering the implementation of Bilux from our specialists

We have been implementing Bilux for 12 years, we have made a lot of mistakes and know what to do in difficult cases. If an inexperienced installer is involved in the installation, we cannot guarantee that the heater will operate at maximum efficiency.
During installation, the installers take into account the height of the ceilings, wall thickness and location of the windows, and ensure fire and electrical safety.

Do not install heaters yourself

Example. The workshop employees bought three of the most powerful ceiling heaters and installed them themselves at a height of 3 meters at the edges and in the middle of the room. It was still cold in the workshop.
When a specialist is involved in the implementation, he makes a heat calculation and selects the power and number of heaters, chooses the right places for installation.
In the workshop, it was necessary to hang five low-power heaters around the perimeter.
The specialist checks the heat losses and, if necessary, advises thermal insulation. In the workshop, it was necessary to insulate the floor.
The specialist takes into account the height of the ceilings and the proportions of the room. In the workshop, it was necessary to hang the heaters half a meter lower.