fbpx

Heating the coffee house

Problem

Opening a Cafe in an old building with poor wall insulation and high ceilings. There was a large selection of different heating systems, from convectors to air-cooled boilers. But the right choice – ceiling electric heaters.

Solution

Ceiling infrared heaters for such premises are ideal:

  • When we use radiators or convectors in premises with high ceilings, all the warm air tends upwards, and more energy is needed to warm up the whole space. With ceiling infrared heaters, the power reserve is at least 30% lower.
  • Installation of the entire heating system and commissioning took 2 days. If you install the boiler with radiators, the installation period will take at least 7 days.
  • Heaters were placed on the ceiling, they were absolutely inconspicuous and did not occupy too much space.
  • Perfectly fitted into the interior.
  • Electricity consumption is 20% lower compared with other systems.

Result

Warm, comfortable and cozy

We recommend ordering the implementation of Bilux from our specialists

We have been implementing Bilux for 12 years, we have made a lot of mistakes and know what to do in difficult cases. If an inexperienced installer is involved in the installation, we cannot guarantee that the heater will operate at maximum efficiency.
During installation, the installers take into account the height of the ceilings, wall thickness and location of the windows, and ensure fire and electrical safety.

Do not install heaters yourself

Example. The workshop employees bought three of the most powerful ceiling heaters and installed them themselves at a height of 3 meters at the edges and in the middle of the room. It was still cold in the workshop.
When a specialist is involved in the implementation, he makes a heat calculation and selects the power and number of heaters, chooses the right places for installation.
In the workshop, it was necessary to hang five low-power heaters around the perimeter.
The specialist checks the heat losses and, if necessary, advises thermal insulation. In the workshop, it was necessary to insulate the floor.
The specialist takes into account the height of the ceilings and the proportions of the room. In the workshop, it was necessary to hang the heaters half a meter lower.