fbpx

Warehouse “Kladovka”

Problem

High-rise was converted into a warehouse, and it is necessary to maintain a temperature of at least +5°C. Warehouse heating can only be done with electric heating systems, but power reserves are very limited.

Solution

The option of heating with the help of an electric boiler and system of radiators was considered very expensive both at the purchasing stage and the installation with maintenance. There were 2 applicable options, wall or ceiling electric heaters. The advantage of the wall heaters is lower price, but the efficiency of the ceiling heaters is much higher and the payback is faster.

Result

We installed BILUX “P” series heaters on the ground floor, where there is an entrance gates and the ceiling height of 3.5 meters, and for heating storage facilities from the first floor and up, we used the BILUX “B” heaters. The average temperature in winter is minus 5°C, the temperature inside premises was maintained at around +10°C.

We recommend ordering the implementation of Bilux from our specialists

We have been implementing Bilux for 12 years, we have made a lot of mistakes and know what to do in difficult cases. If an inexperienced installer is involved in the installation, we cannot guarantee that the heater will operate at maximum efficiency.
During installation, the installers take into account the height of the ceilings, wall thickness and location of the windows, and ensure fire and electrical safety.

Do not install heaters yourself

Example. The workshop employees bought three of the most powerful ceiling heaters and installed them themselves at a height of 3 meters at the edges and in the middle of the room. It was still cold in the workshop.
When a specialist is involved in the implementation, he makes a heat calculation and selects the power and number of heaters, chooses the right places for installation.
In the workshop, it was necessary to hang five low-power heaters around the perimeter.
The specialist checks the heat losses and, if necessary, advises thermal insulation. In the workshop, it was necessary to insulate the floor.
The specialist takes into account the height of the ceilings and the proportions of the room. In the workshop, it was necessary to hang the heaters half a meter lower.