Heating the set on the TV channel


The zone on the set in the newsroom cooled down in the winter period considerably, central heating raised the temperature only to +10°C. The issue was to create a comfortable environment on the set.


Only infrared heating can create zonal heating in a specific area. The heating zone is large, the ceiling height is 6 meters and no heater should be captured by the camera. It was decided to use powerful mid-wave heaters BILUX Y6000.


Infrared photography showed that the temperature on the table rose to +30°C. The result was better than the customer expected.

We recommend ordering the implementation of Bilux from our specialists

We have been implementing Bilux for 12 years, we have made a lot of mistakes and know what to do in difficult cases. If an inexperienced installer is involved in the installation, we cannot guarantee that the heater will operate at maximum efficiency.
During installation, the installers take into account the height of the ceilings, wall thickness and location of the windows, and ensure fire and electrical safety.

Do not install heaters yourself

Example. The workshop employees bought three of the most powerful ceiling heaters and installed them themselves at a height of 3 meters at the edges and in the middle of the room. It was still cold in the workshop.
When a specialist is involved in the implementation, he makes a heat calculation and selects the power and number of heaters, chooses the right places for installation.
In the workshop, it was necessary to hang five low-power heaters around the perimeter.
The specialist checks the heat losses and, if necessary, advises thermal insulation. In the workshop, it was necessary to insulate the floor.
The specialist takes into account the height of the ceilings and the proportions of the room. In the workshop, it was necessary to hang the heaters half a meter lower.