Longwave Bilux B1350
Heat calculation
Result
Bilux Power
1 574 W
The power of traditional heating
2 430 W
Recommended heaters
Any questions?
Technical Specifications heater B1350
Power rating, W.
1200
Power Consumption. Watt.
400
Voltage, V
220/50
Size, mm
1542х163х40
Weight, kg
6
Heating, m2 (main) to
13
Heating, m2 (additional)* to
26
Min. Height, m
2,6
Warranty, years
3
Purpose of the heater heater B1350
The main or additional heating system in residential or commercial premises with a ceiling height of up to 3.5 meters. It can be used as an autonomous electric heating system. It can also be used as a zone heating system, which is very convenient when heating large rooms. All infrared heaters, which have a temperature of up to 300 degrees on the surface of the heating element in operating mode, operate in the long-wave spectrum of heat waves. The temperature on the plate of the Bilux B 1000 infrared heater ranges from 270 to 300 degrees.
Objects of use
- Heating of the store
- Office heating
- Heating of a country house
Heat calculation
Result
Bilux Power
1 574 W
The power of traditional heating
2 430 W
Recommended heaters
Any questions?
Heating the “Electromashina” plant
View
Warehouse “Kladovka”
View
Abris – heating the workplaces
View
Shop “Tabakerochka”
View
Shop “ALLO”
View
Heating the “Marita” factory
View
Heating the coffee house
View
Zhovkovsky Castle
View
Heating of the restaurant “Persha Lvivska Grilova Restaurant of the Ministry of Justice and Justice”
ViewWe recommend ordering the implementation of Bilux from our specialists
We have been implementing Bilux for 12 years, we have made a lot of mistakes and know what to do in difficult cases. If an inexperienced installer is involved in the installation, we cannot guarantee that the heater will operate at maximum efficiency.
During installation, the installers take into account the height of the ceilings, wall thickness and location of the windows, and ensure fire and electrical safety.
Do not install heaters yourself
Example. The workshop employees bought three of the most powerful ceiling heaters and installed them themselves at a height of 3 meters at the edges and in the middle of the room. It was still cold in the workshop.When a specialist is involved in the implementation, he makes a heat calculation and selects the power and number of heaters, chooses the right places for installation.
In the workshop, it was necessary to hang five low-power heaters around the perimeter.
The specialist checks the heat losses and, if necessary, advises thermal insulation. In the workshop, it was necessary to insulate the floor.
The specialist takes into account the height of the ceilings and the proportions of the room. In the workshop, it was necessary to hang the heaters half a meter lower.
The specialist checks the heat losses and, if necessary, advises thermal insulation. In the workshop, it was necessary to insulate the floor.
The specialist takes into account the height of the ceilings and the proportions of the room. In the workshop, it was necessary to hang the heaters half a meter lower.