Mid-wave heater Y1500
Heat calculation
Result
Bilux Power
1 574 W
The power of traditional heating
2 430 W
Recommended heaters
Any questions?
Technical Specifications heater Y1500
Parameters, mm
1548/120/80
Height of suspension, m
2.5
Rated power, W
1400
Voltage, V
230
Service life, years
15
Warranty period, months
12
Weight, kg
5
* Mountings are supplied separately, price
Instrument layout heater Y1500
Applying outdoor heaters on terraces and outdoor verandas, you can raise the feeling of warmth by 10 degrees, providing a flux density of infrared rays with a capacity of 750-1000w/m2 area. A structure without walls, covered with a canopy, will require the highest heat output, and for heating a space with walls on three sides, a small output will be enough. For example, a winter garden in a glazed area will require a power of no more than 300W/m2.
Objects of use
- Industrial shop, warehouse, production area
- Restaurants and cafes, outdoor summer sites
- Gazebos and porches
Heat calculation
Result
Bilux Power
1 574 W
The power of traditional heating
2 430 W
Recommended heaters
Any questions?
Heating the “Electromashina” plant
View
Warehouse “Kladovka”
View
Abris – heating the workplaces
View
Shop “Tabakerochka”
View
Shop “ALLO”
View
Heating the “Marita” factory
View
Heating the coffee house
View
Zhovkovsky Castle
View
Heating of the restaurant “Persha Lvivska Grilova Restaurant of the Ministry of Justice and Justice”
ViewWe recommend ordering the implementation of Bilux from our specialists
We have been implementing Bilux for 12 years, we have made a lot of mistakes and know what to do in difficult cases. If an inexperienced installer is involved in the installation, we cannot guarantee that the heater will operate at maximum efficiency.
During installation, the installers take into account the height of the ceilings, wall thickness and location of the windows, and ensure fire and electrical safety.
Do not install heaters yourself
Example. The workshop employees bought three of the most powerful ceiling heaters and installed them themselves at a height of 3 meters at the edges and in the middle of the room. It was still cold in the workshop.When a specialist is involved in the implementation, he makes a heat calculation and selects the power and number of heaters, chooses the right places for installation.
In the workshop, it was necessary to hang five low-power heaters around the perimeter.
The specialist checks the heat losses and, if necessary, advises thermal insulation. In the workshop, it was necessary to insulate the floor.
The specialist takes into account the height of the ceilings and the proportions of the room. In the workshop, it was necessary to hang the heaters half a meter lower.
The specialist checks the heat losses and, if necessary, advises thermal insulation. In the workshop, it was necessary to insulate the floor.
The specialist takes into account the height of the ceilings and the proportions of the room. In the workshop, it was necessary to hang the heaters half a meter lower.